2 PEOPLE REQUIREDSHOWER ENCLOSURESP002IT IS MANDATORY TO HAVE A WALL STUD ON EACH SIDE OF THE SHOWER UNIT TO SECURELY FASTEN THE RAIL TO TH
101Remove running rail (1) from wall brackets (2). Drill holes in walls with a drill bit, intended for ceramic tiles, through to the wall
11 SMALL FIXED PANEL INSTALLATION 88CFasten the small xed panel (8) to the running rail (1) by means of the glass holders (5). Align the small xed
129 DOOR PANELInstall sliding door (6) ensuring that rollers (3) are positioned over the running rail (1).-Ensure that sliding door (6) is plac
13STRAIGHT HANDLE10Install bottom rollers, making sure that they are tangent to the running rail (1).Install straight handle (9) onto sliding door
14PANNEAU FIXE/FIXED PANEL112611BOTTOM11DOOR SIDE GAS KET 11Install door side gasket (12) onto sliding door panel (6).12 1/2” (12.57 mm)TOP612
15SILICONE1310Adjust the position of the stoppers (4) so as to ensure a maximum opening and closing range. Apply silicone between the bottom of
2PANNEAU FIXE/FIXED PANEL1PARTS LISTING ... 3GLASS PANEL DIMENSIONS ...
31PARTS LISTING32146791011141321245810141615ITEM PARTS QTY1 Running rail 12 Wall bracket for running rail 23Set of double rollers 44Door stopper 25
4TOOLSHARDWAREPENCILDRILL SILICONESCREWDRIVERSCUTTING PLIER LEVELTAPE MEASURE181920 If the shower panels are to be assembled on ceramic tiles, use a 1
5GASKET INSTALLATION 11C1APlace door panel (6) inside tub to simplify following installation procedures. Ensure placing the panel onto a cushione
6RUNNING RAIL 22A2B2 Position the stoppers (4) on the running rail (1) as illustrated. Secure them temporarily in place. Position the wall bracket
74BOTTOM GLASS CLIPSGLASS HOLDERS3Insert gaskets (16) in the glass clip (14) andbottom center guide (15). F xed panel (7) with the glass holders (4)
85FIXED PANEL PLACEMEMENT5BPosition the xed panel assembly (7) on threshold of base (B) as shown. Adjust the wall brackets so as to ensure that
96Mark the screw locations for the wall brack-ets (2) on the walls on both sides of shower as well as the placement the glass clip (14) and bottom ce
Comments to this Manuals